Параметри на производот

Item Type:

MPPT Solar Charge Controller

System Voltage:

12V 24V 36V 48V Auto

No Load Loss:

≤0.4W

Maximum Solar Input Voltage:

180V (25℃), 150V (-25℃)

Battery Voltage:

9~70V

Maximum Power Point Voltage Range:

Battery voltage plus 2V~120V

Rated Charging Current:

60A

Rated Load Current:

20A

Maximum Photovoltaic System Input Power:

720W 12V:

1440W 24V:

2160W 36V:

2880W 48V:

Conversion Efficiency:

≤98%

MPPT Tracking Efficiency:

>99%

Temperature Compensation Coefficient:

-2mv/℃/2V(default)

Operating Temperature:

-10℃~+65℃

Waterproof Class:

IP21

Altitude:

≤3000m

Product Size:

Approx. 214 x 115 x 50mm / 8.43 x 4.53 x 1.97in

How to Use:

Takeouttheproductandinstallaccordingtotheinstructions.:

Package List:

1 x Controller:

4 x Screw:

4 x Support:

1 x User Manual:

Note:

1. Because the voltage processed by the controller exceeds the maximum safety limit of human body.:

2. The controller has no internal components that need to be maintained. Therefore, do not attempt to remove or repair the controller.:

3. Install the controller indoors to prevent component exposure and water intrusion.:

4. During operation, the heat sink may reach a very high temperature. Therefore, install the controller in a place with good ventilation.:

5. It is recommended to install a fuse or circuit breaker outside the controller.:

6. Before installation and wiring, make sure to disconnect the photovoltaic array and the fuse close to the battery terminals, or circuit breaker connection.:

7. After installation, check whether all connections are firm and reliable to avoid dangers caused by loose connections.: