Параметри на производот

Product grade:

 Industrial grade

Corporeal:

 Carbide

Type:

Milling cutter

DIY Supplies:

Woodworking

Applicable machine:

Trimming machine,gong machine

Sizing Shank Diameter Cutter diameter Blade length:

1/4''x5/16'' 1/4'' 7.96mm 30mm:

1/2''x1/2'' 1/2'' 12.7mm 38.1mm:

Features:

Specially fain for bench trimming machine,portable engraving machine and so on.:

No shining,smooth cutting,no burrs,no burrs,no blackening.:

Blade sharper and improves the service efficiency and durability.:

Cutting tools can produce still surface for wood such as hardwood,softwood and synthetic board,but should avoid processing metal materials such as copper and iron as well as non-wood materials such as sand and stone.:

Make sure to use the clamping sleeve of appropriate size,because it is worn seriously,not round enough and with taper of internal bore cannot provide enough clamping strength,which leads to vibration or fly off when the blade handle is broken.:

Never assume that the new jacket is safe and reliable.When uneven contact marks or grooves are found in the handle part after clamping,slip situation and interior hole deformation of the clamp should be replaced immediately to avoid accidents.:

When the cutter is installed and clamped,stop the machine immediately if it is ground that the knife has a fluttering phenomenon when working. Repeat the clamping for several times so that the tool handle and the clamping sleeve are in full contact and the work is carried out.:

The tool handle should be in good contac :